APC Back-UPS 650VA, 230V, 1 USB charging port
Back-UPS Features & Benefits Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Marketing features Battery-protected and surge-only outlets Reserves power capacity and run t
Description
Back-UPS Features & Benefits Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Marketing features Battery-protected and surge-only outlets Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Protection Surge only outlets Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes .
Availability Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Manageability LED status display Quickly understand unit and power status with visual indicators.
Audible alarms Provides notification of changing utility power and UPS power conditions
Specifications
- Output Max Configurable Power (Watts)
- 400 Watts / 650VA
- Efficiency at Full Load
- 80.0 %
- Output Frequency (sync to mains)
- 47 – 63
- Hz Sync to
- mains, 50/60 Hz +/- 1
- Hz Unsynchronised Other Output Voltages
- 220 V
- Topology Standby Waveform type Stepped approximation to a sinewave
- Transfer
- Time
- 6 ms typical 10 ms maximum
- Input Input frequency
- 47 – 63
- Hz Input voltage range for main operations
- 180 – 266V
- Efficiency at Full Load
- 80.0 % Batteries &
- Runtime Battery type Lead-acid battery Typical recharge time
- 16hour(s)
- Nominal Battery Voltage
- 12 V
- Replacement
- Battery
- Expected Battery Life (years)
- 2 – 5
- Battery Charge Power (Watts)
- 5
- Watts Runtime View Here
- | Output |
- Max Configurable Power (Watts)
- | 400 Watts / 650VA |
- Efficiency at Full Load
- | 80.0 % |
- Output Frequency (sync to mains)
- | 47 – 63
- Hz Sync to
- mains, 50/60 Hz +/- 1
- Hz Unsynchronised
- |
- Other Output Voltages
- | 220 V | Topology | Standby |
- Waveform type
- |
- Stepped approximation to a sinewave
- |
- Transfer Time
- | 6 ms typical : 10 ms maximum | Input |
- Input frequency
- | 47 – 63 Hz |
- Input voltage range for main operations
- | 180 – 266V |
- Efficiency at Full Load
- | 80.0 % | Batteries & Runtime |
- Battery type
- |
- Lead-acid battery
- |
- Typical recharge time
- | 16hour(s) |
- Nominal Battery Voltage
- | 12 V |
- Replacement Battery
- | APCRBC110 |
- Expected Battery Life (years)
- | 2 – 5 |
- Battery Charge Power (Watts)
- | 5 Watts | Runtime |
- View
- Here
- Transfer Time
- | 6 ms typical 10 ms maximum
- Transfer Time
- | 6 ms typical 10 ms maximum



